Plumbing Project

Plumbing can imply a lot of different connotations depending upon whom you ask or talk to about it. We all know that it’s essential to your home, but that doesn’t mean that you should neglect it or just leave it to a pro. Take some time to learn how to do it yourself using the tips below.

Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.

Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.

Check your fixtures to ensure the overflow holes are clear of debris and mineral build-up. You may not even notice the overflow holes on your sink, but if you have a major water leak you will soon regret your apathy. When you’re periodically checking your sink for possible problems, take the time to clean out the overflow holes.

patching your pipeHave you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.

It’s true that plumbing should be of utmost importance when it comes to home improvement. That said, you should not just leave it until there is a problem and then call a pro. You can learn to take care of it yourself and hopefully these tips gave you advice on how to do that.